精密管供应商

The vacuum carburizing temperature is generally higher than that of ordinary gas carburizing. Carburizing and diffusion are often used at 920~1040 C. As shown, there are two stages: pulse ventilation, stop gas, multi-stage carburizing and diffusion. The effect is better. Vacuum carburized layer is formed faster than ordinary gas, liquid and solid carburized layer because of its high temperature, especially its clean surface and high activity. If the carburized layer needs 1 millimeters, it will take 927 hours and 1 hours at 1033 degrees Celsius, only 5 hours.
Precision steel pipe has the advantages of no oxide layer on the inner and outer walls, high pressure, no leakage, high precision, high finish, small cold bending deformation, high flatness, no cracks and so on. It is mainly used to produce pneumatic or hydraulic components. As a cylinder or an oil cylinder, it can be a seamless tube. The chemical composition of cold drawn precision steel pipe

在加热时间（s）＝kd，d为工件的厚度，mm，k为系数，和出厂数据。（3）冷却。不同的冷却系统用于不同的组织。它通常在静态空气中冷却。如果工件很大，可以通过吹风或雾来冷却。长度一般为5～8m或4～7m，主要由热轧碳结构和ST65组成。进口规格直径小，305mm，大规格7813mm。7.3。小口径薄壁无缝钢管，如183mm、223 mm、23.93mm等，分别从法国、西班牙进口。

It can be said that, to a certain extent, this is because of excessive interference and other local power from the private interest, the steel industry not only delayed the transfer to the upstream of the industrial chain to achieve the goal, but also made the T overcapacity problem of the steel industry more and more serious. In this regard, the problem of overcapacity in the steel industry has not been alleviated. In essence, it should be a question of the relationship between power and market, whether the market should play a decisive role or not.